# RiverWare_Model 7.1.6 Patch
# Created 18:43 December 21, 2017
# CADSWES, University of Colorado at Boulder, http://cadswes.colorado.edu/
# 
# The catalog command is parsed by the RiverSMART
# RiverWare model plugin:
#  - It must appear in the first 100 lines of the file.
#  - Lines up to and including it must not exceed 4K bytes.
#  - Its name must not change.
Catalog {\
<Catalog>\
 <MRMControl><mrmCfgList></mrmCfgList>\
 </MRMControl>\
 <DmiMgr><datasetList></datasetList>\
  <dmiList></dmiList>\
 </DmiMgr>\
 <RplApplication><rplSetList><rplSetInfo rplSetType="Initialization Rules" rplSetName="Initialization Rules Set"></rplSetInfo>\
   <rplSetInfo rplSetType="Expression Slots" rplSetName="Expression Slot Functions Set"></rplSetInfo>\
  </rplSetList>\
 </RplApplication>\
</Catalog>\
} # End Catalog
ModelSimObjCount   3
ModelAccountCount  0
ModelSupplyCount   0
ModelExchangeCount 0
DST 0
$ws.Model.FileInfo saveInfo 1 {philw} {12-21-2017 18:43:11} {RiverWare 7.1.6} 
$ws.Model.FileInfo comment {}
$ws.Model.RunHistoryParam MaxModelRunHistoryRecs 1
$ws.AutoSave 1 0 0 15 {C:/Users/philw/AppData/Local/Temp/} none
$ws.StringMgr 1 {\
<stringMgr size="256" name=""/>\
}
SaveOutputs 1
SaveExtPrecision 0
FlagEncoding 3
BaselineModel 0
ModelLockSet 0
ObjectListWidth 256
WsObjListOrderMode SORT_BY_NAME
LockedIcons 0
SelWindowIcon {RwIconStandard}
WorkspaceSize 6450 6450
AccountingSize 6450 6450
GeospatialSize 6450 6450
DisplayProperties 0
EpochBeginYear 1800
OverrideDefaultPlotAxesForVertDist 0
CurrCanvasType SIMULATION
InitCanvasSpec SIMULATION {\
<InitialViewSpec CanvId="SIMULATION" LocType="LocType_CenterAveObj">\
 <Zoom factor="1"/>\
 <CenterPos x="248" y="6335.5"/>\
</InitialViewSpec>}
InitCanvasSpec ACCOUNTING {\
<InitialViewSpec CanvId="ACCOUNTING" LocType="LocType_CenterAveObj">\
 <Zoom factor="1"/>\
 <CenterPos x="0" y="0"/>\
</InitialViewSpec>}
InitCanvasSpec GEOSPATIAL {\
<InitialViewSpec CanvId="GEOSPATIAL" LocType="LocType_CenterAveObj">\
 <Zoom factor="1"/>\
 <CenterPos x="0" y="0"/>\
</InitialViewSpec>}
WaterYearStartMonthIndex 9 YearNamedFromEnd
SlotGroupsEnabled 1
SlotDlgPrefs {\
<SlotDlgPrefs>\
 <ShowSelStatus show="1"/>\
 <ShowNotes show="P"/>\
 <ShowDesc_General show="P"/>\
</SlotDlgPrefs>}
$ws.runInfo pauseAtDate {12-22-2017 00:00:00}
$ws.runInfo pauseAtPriority 2
$ws.runInfo setDescription {Model Run}
$ws.runInfo runParam {12-21-2017 18:00:00} {12-22-2017 18:00:00} 6 HOUR 
$ws.runInfo setType 0
$ws.runInfo setResumedRun 0 {12-22-2017 00:00:00}
$ws.runInfo setActiveCategories 1 0
$ws.runInfo setInlineCategories 1 0
$ws.runInfo setMaxSimIterations 40
$ws.runInfo setMaxAcctIterations 20
$ws.runInfo setSeriesExtensionIncrement 1
$ws.runInfo setWarnOutOfBounds 0
$ws.multiRunInfo setDescription {Model Run}
$ws.multiRunInfo runParam {12-21-2017 18:00:00} {12-22-2017 18:00:00} 6 HOUR 
$ws.multiRunInfo setType 3
$ws.multiRunInfo setResumedRun 0 {12-22-2017 00:00:00}
$ws.multiRunInfo setActiveCategories 1 0
$ws.multiRunInfo setInlineCategories 1 0
$ws.multiRunInfo setMaxSimIterations 40
$ws.multiRunInfo setMaxAcctIterations 20
$ws.multiRunInfo setSeriesExtensionIncrement 1
$ws.multiRunInfo setWarnOutOfBounds 0
# Section: Unit Manager
Section {Unit Manager}
set unitMgr "$ws.UnitMgr"
$unitMgr initScaledUnits 61
$unitMgr scaledUnit 0 {NONE} 1 {NONE}
$unitMgr scaledUnit 1 {Length} 1 {m}
$unitMgr scaledUnit 2 {Length} 1 {ft}
$unitMgr scaledUnit 3 {SqrtLength} 1 {m1/2}
$unitMgr scaledUnit 4 {Area} 1 {m2}
$unitMgr scaledUnit 5 {Area} 1 {acre}
$unitMgr scaledUnit 6 {Volume} 1 {m3}
$unitMgr scaledUnit 7 {Volume} 1 {acre-ft}
$unitMgr scaledUnit 8 {Flow} 1 {cms}
$unitMgr scaledUnit 9 {Flow} 1 {cfs}
$unitMgr scaledUnit 10 {Flow} 1 {acre-ft/day}
$unitMgr scaledUnit 11 {FlowSquared} 1 {cms2}
$unitMgr scaledUnit 12 {FlowPerSqrtLength} 1 {cms/m1/2}
$unitMgr scaledUnit 13 {PerFlow} 1 {1/cms}
$unitMgr scaledUnit 14 {Power} 1 {MW}
$unitMgr scaledUnit 15 {PowerPerFlow} 1 {MW/cms}
$unitMgr scaledUnit 16 {Energy} 1 {MWH}
$unitMgr scaledUnit 17 {Time} 1 {hr}
$unitMgr scaledUnit 18 {Time} 1 {day}
$unitMgr scaledUnit 19 {TimeSquared} 1 {hour2}
$unitMgr scaledUnit 20 {Mass} 1 {g}
$unitMgr scaledUnit 21 {Mass} 1 {tons}
$unitMgr scaledUnit 22 {Heat} 1 {J}
$unitMgr scaledUnit 23 {EnergyFlux} 1 {J/m2sec}
$unitMgr scaledUnit 24 {MassFlux} 1 {g/m2sec}
$unitMgr scaledUnit 25 {VolFlux} 1 {g/m3sec}
$unitMgr scaledUnit 26 {Concentration} 1 {g/m3}
$unitMgr scaledUnit 27 {Concentration} 1 {lb/ft3}
$unitMgr scaledUnit 28 {AreaPerTime} 1 {m2/s}
$unitMgr scaledUnit 29 {PerTime} 1 {1/sec}
$unitMgr scaledUnit 30 {Temperature} 1 {C}
$unitMgr scaledUnit 31 {LengthPerTemperature_F} 1 {m/F}
$unitMgr scaledUnit 32 {TemperatureInFahren} 1 {F}
$unitMgr scaledUnit 33 {SpecificHeat} 1 {J/gC}
$unitMgr scaledUnit 34 {Velocity} 1 {m/s}
$unitMgr scaledUnit 35 {VelocityPerTemperature_F} 1 {m/s-F}
$unitMgr scaledUnit 36 {Density} 1 {kg/m3_dens}
$unitMgr scaledUnit 37 {PowerCost} 1 {$/MWh}
$unitMgr scaledUnit 38 {Value} 1 {$}
$unitMgr scaledUnit 39 {ValuePerFlow} 1 {$/cms}
$unitMgr scaledUnit 40 {ValuePerVolume} 1 {$/m3}
$unitMgr scaledUnit 41 {LengthPerVolume} 1 {m/m3}
$unitMgr scaledUnit 42 {LengthPerFlow} 1 {m/cms}
$unitMgr scaledUnit 43 {PerLength} 1 {1/m}
$unitMgr scaledUnit 44 {PerLengthTime} 1 {1/m-s}
$unitMgr scaledUnit 45 {FlowPerLength} 1 {cms/m}
$unitMgr scaledUnit 46 {VolumePerFlow} 1 {m3/cms}
$unitMgr scaledUnit 47 {energyPerLength} 1 {MWH/m}
$unitMgr scaledUnit 48 {powerPerLength} 1 {MW/m}
$unitMgr scaledUnit 49 {Fraction} 1 {decimal}
$unitMgr scaledUnit 50 {FractionPerFlow} 1 {decimal/cms}
$unitMgr scaledUnit 51 {FractionPerLength} 1 {decimal/m}
$unitMgr scaledUnit 52 {noDimension} 1 {m/m}
$unitMgr scaledUnit 53 {VolumeSquared} 1 {m6}
$unitMgr scaledUnit 54 {TimePerLength} 1 {s/m}
$unitMgr scaledUnit 55 {FlowVolume} 1 {m6/t}
$unitMgr scaledUnit 56 {FlowTime} 1 {cmshour}
$unitMgr scaledUnit 57 {FlowPerTime} 1 {cmss}
$unitMgr scaledUnit 58 {DateTime} 1 {FullDateTime}
$unitMgr scaledUnit 59 {DateTime} 1 {MonthAndDay}
$unitMgr scaledUnit 60 {String} 1 {Text}
$unitMgr end
# Section: Unit Schemes
"$ws.unitScheme" addUserScheme {<UnitScheme name="Scheme 1">\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="NONE"/>\
  <Attribs prec="2" unitType="NONE" format="f" units="NONE"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Length"/>\
  <Attribs prec="2" unitType="Length" format="f" units="m"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="SqrtLength"/>\
  <Attribs prec="2" unitType="SqrtLength" format="f" units="m1/2"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Area"/>\
  <Attribs prec="2" unitType="Area" format="f" units="m2"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Volume"/>\
  <Attribs prec="2" unitType="Volume" format="f" units="m3"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Flow"/>\
  <Attribs prec="2" unitType="Flow" format="f" units="cms"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="FlowSquared"/>\
  <Attribs prec="2" unitType="FlowSquared" format="f" units="cms2"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="FlowPerSqrtLength"/>\
  <Attribs prec="2" unitType="FlowPerSqrtLength" format="f" units="cms/m1/2"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="PerFlow"/>\
  <Attribs prec="2" unitType="PerFlow" format="f" units="1/cms"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Power"/>\
  <Attribs prec="2" unitType="Power" format="f" units="MW"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="PowerPerFlow"/>\
  <Attribs prec="2" unitType="PowerPerFlow" format="f" units="MW/cms"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Energy"/>\
  <Attribs prec="2" unitType="Energy" format="f" units="MWH"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Time"/>\
  <Attribs prec="2" unitType="Time" format="f" units="hr"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="TimeSquared"/>\
  <Attribs prec="2" unitType="TimeSquared" format="f" units="hour2"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Mass"/>\
  <Attribs prec="2" unitType="Mass" format="f" units="g"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Heat"/>\
  <Attribs prec="2" unitType="Heat" format="f" units="J"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="EnergyFlux"/>\
  <Attribs prec="2" unitType="EnergyFlux" format="f" units="J/m2sec"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="MassFlux"/>\
  <Attribs prec="2" unitType="MassFlux" format="f" units="g/m2sec"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="VolFlux"/>\
  <Attribs prec="2" unitType="VolFlux" format="f" units="g/m3sec"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Concentration"/>\
  <Attribs prec="2" unitType="Concentration" format="f" units="g/m3"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="AreaPerTime"/>\
  <Attribs prec="2" unitType="AreaPerTime" format="f" units="m2/s"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="PerTime"/>\
  <Attribs prec="2" unitType="PerTime" format="f" units="1/sec"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Temperature"/>\
  <Attribs prec="2" unitType="Temperature" format="f" units="C"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="LengthPerTemperature_F"/>\
  <Attribs prec="2" unitType="LengthPerTemperature_F" format="f" units="m/F"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="TemperatureInFahren"/>\
  <Attribs prec="2" unitType="TemperatureInFahren" format="f" units="F"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="SpecificHeat"/>\
  <Attribs prec="2" unitType="SpecificHeat" format="f" units="J/gC"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Velocity"/>\
  <Attribs prec="2" unitType="Velocity" format="f" units="m/s"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="VelocityPerTemperature_F"/>\
  <Attribs prec="2" unitType="VelocityPerTemperature_F" format="f" units="m/s-F"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Density"/>\
  <Attribs prec="2" unitType="Density" format="f" units="kg/m3_dens"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="PowerCost"/>\
  <Attribs prec="2" unitType="PowerCost" format="f" units="$/MWh"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Value"/>\
  <Attribs prec="2" unitType="Value" format="f" units="$"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="ValuePerFlow"/>\
  <Attribs prec="2" unitType="ValuePerFlow" format="f" units="$/cms"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="ValuePerVolume"/>\
  <Attribs prec="2" unitType="ValuePerVolume" format="f" units="$/m3"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="LengthPerVolume"/>\
  <Attribs prec="2" unitType="LengthPerVolume" format="f" units="m/m3"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="LengthPerFlow"/>\
  <Attribs prec="2" unitType="LengthPerFlow" format="f" units="m/cms"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="PerLength"/>\
  <Attribs prec="2" unitType="PerLength" format="f" units="1/m"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="PerLengthTime"/>\
  <Attribs prec="2" unitType="PerLengthTime" format="f" units="1/m-s"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="FlowPerLength"/>\
  <Attribs prec="2" unitType="FlowPerLength" format="f" units="cms/m"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="VolumePerFlow"/>\
  <Attribs prec="2" unitType="VolumePerFlow" format="f" units="m3/cms"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="energyPerLength"/>\
  <Attribs prec="2" unitType="energyPerLength" format="f" units="MWH/m"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="powerPerLength"/>\
  <Attribs prec="2" unitType="powerPerLength" format="f" units="MW/m"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="Fraction"/>\
  <Attribs prec="2" unitType="Fraction" format="f" units="decimal"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="FractionPerFlow"/>\
  <Attribs prec="2" unitType="FractionPerFlow" format="f" units="decimal/cms"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="FractionPerLength"/>\
  <Attribs prec="2" unitType="FractionPerLength" format="f" units="decimal/m"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="noDimension"/>\
  <Attribs prec="2" unitType="noDimension" format="f" units="m/m"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="VolumeSquared"/>\
  <Attribs prec="2" unitType="VolumeSquared" format="f" units="m6"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="TimePerLength"/>\
  <Attribs prec="2" unitType="TimePerLength" format="f" units="s/m"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="FlowVolume"/>\
  <Attribs prec="2" unitType="FlowVolume" format="f" units="m6/t"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="FlowTime"/>\
  <Attribs prec="2" unitType="FlowTime" format="f" units="cmshour"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="FlowPerTime"/>\
  <Attribs prec="2" unitType="FlowPerTime" format="f" units="cmss"/>\
 </Rule>\
 <Rule>\
  <Key keyType="UnitTypeKey" unitType="String"/>\
  <Attribs prec="2" unitType="String" format="f" units="Text"/>\
 </Rule>\
</UnitScheme>\
}
"$ws.unitScheme" activeUnitScheme {Scheme 1}
"$ws.unitScheme" skipTransitionScheme true 
CanvasConfig SIMULATION IconLabelLocation {Below}
CanvasConfig SIMULATION CanvasColor #ffffff
CanvasConfig SIMULATION IconLabelFont {MS Shell Dlg 2,8.25,-1,5,50,0,0,0,0,0}
CanvasConfig SIMULATION IconLabelFontColor #000000
CanvasConfig ACCOUNTING IconLabelLocation {Below}
CanvasConfig ACCOUNTING CanvasColor #ffffff
CanvasConfig ACCOUNTING IconLabelFont {MS Shell Dlg 2,8.25,-1,5,50,0,0,0,0,0}
CanvasConfig ACCOUNTING IconLabelFontColor #000000
CanvasConfig GEOSPATIAL ProjDescription {}
CanvasConfig GEOSPATIAL ProjectionUnitsString {} 0
CanvasConfig GEOSPATIAL ProjHorizAxisText {x}
CanvasConfig GEOSPATIAL ProjVertAxisText {y}
CanvasConfig GEOSPATIAL GeoDescription {}
CanvasConfig GEOSPATIAL GeoUnitsString {deg} 4
CanvasConfig GEOSPATIAL GeoHorizAxisText {long}
CanvasConfig GEOSPATIAL GeoVertAxisText {lat}
CanvasConfig GEOSPATIAL ProjWellKnownText {}
CanvasConfig GEOSPATIAL CanvasLowerLeft 0 0
CanvasConfig GEOSPATIAL CanvasUpperRight 6450 6450
CanvasConfig GEOSPATIAL IconLabelLocation {Below}
CanvasConfig GEOSPATIAL IconSize 40
CanvasConfig GEOSPATIAL CanvasColor #ffffff
CanvasConfig GEOSPATIAL IconLabelFont {MS Shell Dlg 2,8.25,-1,5,50,0,0,0,0,0}
CanvasConfig GEOSPATIAL IconLabelFontColor #000000
CanvasConfig GEOSPATIAL DisplayScale 1
CanvasConfig GEOSPATIAL DisplayScaleFromImage 1
# Section: DMI (part one)
set mgr "$ws.dmiMgr"
"$mgr" numInvRec 0
# Section: New Time Series Text Annotation Notes
set annoMgr "$ws.AnnoMgr"
# Section: Objects
Section {Objects}
set obj {Reach1}
set o "$ws.Reach1"
$ws SimObj $obj {Reach} 86 90 {} 220 569 220 569
"$o" geospatialCoords 0 0 220 569
"$o" objAttributes {<SimObjAttributes simObjName="Reach1"/> \
}
"$o" objOrd wsList 5027
"$o" objSlotOrderType ListOrder_DEFAULT 0 Ascend
"$o" sDM {Routing} {No Routing} {STD}
"$o" sDM {Routing Parameters} {None} {STD}
"$o" sDM {Local Inflow and Solution Direction} {No Local Inflow, Solve Inflow or Outflow} {STD}
"$o" sDM {Generate Local Inflows} {None} {STD}
"$o" sDM {Reach Evaporation} {None} {STD}
"$o" sDM {Depth to Flow} {None} {STD}
"$o" sDM {Stage} {None} {STD}
"$o" sDM {Stage Adjustment} {None} {STD}
"$o" sDM {Volume} {None} {STD}
"$o" sDM {Gain Loss} {None} {STD}
"$o" sDM {Apply Gain Loss} {Current Outflow} {STD}
"$o" sDM {Reach Seepage} {None} {STD}
"$o" sDM {Seepage Routing} {No Routing} {STD}
"$o" sDM {Reach Conductance} {Specify Conductance} {STD}
"$o" sDM {Drain Elevation} {None} {STD}
"$o" sDM {Reach Bank Storage} {None} {STD}
"$o" sDM {Outflow Adjustment} {None} {STD}
"$o" sDM {Diversion from Reach} {None} {STD}
"$o" sDM {Min Diversion Bypass} {None} {STD}
"$o" sDM {MODFLOW Link Category Reach} {None} {STD}
"$o" sDM {Reach Account Slot Inflow} {No Method} {OLAM_NEVER}
"$o" sDM {Reach Account Gain Loss} {No Method} {OLAM_NEVER}
"$o" sDM {Reach Final Inflows} {Constrain Final Inflows} {STD}
"$o" sDM {Reach Water Quality} {None} {STD}
"$o" sDM {Water Quality Routing} {None} {STD}
"$o" sDM {Reach Seepage Water Quality} {None} {STD}
"$o" sDM {Reach Optimization Total Dissolved Gas} {None} {STD}
"$o" sDM {Water Elevation at Diversion STLE} {Line} {STD}
"$o" sDM {Water Elevation at Diversion STGE} {Piecewise} {STD}
"$o" sDM {Water Elevation at Diversion MTLE} {Line} {STD}
"$o" sDM {Water Elevation at Diversion MTGE} {Piecewise} {STD}
"$o" sDM {Instantiate Reach Optimization Slots} {Instantiate Reach Optimization Slots} {STD}
"$o" sDM {Alternative Routing on Subbasin} {None} {STD}
"$o" {SimObjMultiSlot} {Return Flow}
set s "$o.Return Flow"
"$s" order 3 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
"$o" {SeriesSlot} {Inflow}
set s "$o.Inflow"
"$s" order 1 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
"$o" {SeriesSlot} {Outflow}
set s "$o.Outflow"
"$s" order 2 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
"$o" hideSlots 0 hideOff hideEmptyOff
set obj {AggReach1}
set o "$ws.AggReach1"
$ws SimObj $obj {AggReach} 173 90 {} 305 635 305 635
"$o" geospatialCoords 0 0 305 635
"$o" objAttributes {<SimObjAttributes simObjName="AggReach1"/> \
}
"$o" objOrd wsList 5028
"$o" objSlotOrderType ListOrder_OBJECT 0 Ascend
"$o" sDM {Agg Reach Water Quality} {None} {STD}
"$o" sDM {WQ on Reach Elements} {None} {STD}
"$o" {SeriesSlot} {Inflow}
set s "$o.Inflow"
"$s" order 0 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
"$o" {SeriesSlot} {Outflow}
set s "$o.Outflow"
"$s" order 1 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
"$o" {SeriesSlot} {Total Diversion}
set s "$o.Total Diversion"
"$s" order 2 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
"$o" {SeriesSlot} {Total Return Flow}
set s "$o.Total Return Flow"
"$s" order 3 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
"$o" {SeriesSlot} {Total Local Inflow}
set s "$o.Total Local Inflow"
"$s" order 4 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
"$o" hideSlots 0 hideOff hideEmptyOff
$ws ElemObj {Reach} {AggReach1:Reach0} {AggReach1}
set obj {AggReach1:Reach0}
set o "$ws.AggReach1:Reach0"
$ws SimObj $obj {Reach} 305 635 {} 0 0 0 0
"$o" geospatialCoords 0 0 0 0
"$o" objAttributes {<SimObjAttributes simObjName="AggReach1:Reach0"/> \
}
"$o" objOrd wsList 5029
"$o" objSlotOrderType ListOrder_DEFAULT 0 Ascend
"$o" sDM {Routing} {No Routing} {STD}
"$o" sDM {Routing Parameters} {None} {STD}
"$o" sDM {Local Inflow and Solution Direction} {No Local Inflow, Solve Inflow or Outflow} {STD}
"$o" sDM {Generate Local Inflows} {None} {STD}
"$o" sDM {Reach Evaporation} {None} {STD}
"$o" sDM {Depth to Flow} {None} {STD}
"$o" sDM {Stage} {None} {STD}
"$o" sDM {Stage Adjustment} {None} {STD}
"$o" sDM {Volume} {None} {STD}
"$o" sDM {Gain Loss} {None} {STD}
"$o" sDM {Apply Gain Loss} {Current Outflow} {STD}
"$o" sDM {Reach Seepage} {None} {STD}
"$o" sDM {Seepage Routing} {No Routing} {STD}
"$o" sDM {Reach Conductance} {Specify Conductance} {STD}
"$o" sDM {Drain Elevation} {None} {STD}
"$o" sDM {Reach Bank Storage} {None} {STD}
"$o" sDM {Outflow Adjustment} {None} {STD}
"$o" sDM {Diversion from Reach} {None} {STD}
"$o" sDM {Min Diversion Bypass} {None} {STD}
"$o" sDM {MODFLOW Link Category Reach} {None} {STD}
"$o" sDM {Reach Account Slot Inflow} {No Method} {OLAM_NEVER}
"$o" sDM {Reach Account Gain Loss} {No Method} {OLAM_NEVER}
"$o" sDM {Reach Final Inflows} {Constrain Final Inflows} {STD}
"$o" sDM {Reach Water Quality} {None} {STD}
"$o" sDM {Water Quality Routing} {None} {STD}
"$o" sDM {Reach Seepage Water Quality} {None} {STD}
"$o" sDM {Reach Optimization Total Dissolved Gas} {None} {STD}
"$o" sDM {Water Elevation at Diversion STLE} {Line} {STD}
"$o" sDM {Water Elevation at Diversion STGE} {Piecewise} {STD}
"$o" sDM {Water Elevation at Diversion MTLE} {Line} {STD}
"$o" sDM {Water Elevation at Diversion MTGE} {Piecewise} {STD}
"$o" sDM {Instantiate Reach Optimization Slots} {Instantiate Reach Optimization Slots} {STD}
"$o" sDM {Alternative Routing on Subbasin} {None} {STD}
"$o" {SimObjMultiSlot} {Return Flow}
set s "$o.Return Flow"
"$s" order 2 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
"$o" {SeriesSlot} {Inflow}
set s "$o.Inflow"
"$s" order 0 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
"$o" {SeriesSlot} {Outflow}
set s "$o.Outflow"
"$s" order 1 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
"$o" {SeriesSlot} {Custom Slot Two}
set s "$o.Custom Slot Two"
"$s" order 4 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
"$o" {SeriesSlot} {Custom Slot One}
set s "$o.Custom Slot One"
"$s" order 3 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
"$o" {SeriesSlot} {Custom Slot Three}
set s "$o.Custom Slot Three"
"$s" order 5 
"$s" cvg 2 0.0001
"$s" unit 8 {%f} 2
"$s" minMax NaN NaN
"$s" setCSeries {12-21-2017 18:00:00} 1 6 HOUR -1 NaN 2
# Section: Objects/Snapshots
# Section: Object Relationships
set obj {Reach1}
set o "$ws.Reach1"
set obj {AggReach1}
set o "$ws.AggReach1"
set obj {AggReach1:Reach0}
set o "$ws.AggReach1:Reach0"
# Section: Workspace Ornaments
Section {Workspace Ornaments}
Section {Links}
# Section: Links
# Section: Link Groups
$ws LinkGroup {Default} {linkDisplayInfo Sty:Solid Vis:1 Wid:0 Color:0 Pri:1 Ena:1}
$ws LinkGroup {Main Channel Links} {linkDisplayInfo Sty:Solid Vis:1 Wid:0 Color:0 Pri:0 Ena:1}
# Section: SimObj Groups
# Section: Multiple Run Management
Section {Multiple Run Management}
$ws.mrm format 2
$ws.mrm iterRplSet {RULESET\
NAME "Iterative MRM Rules Set";\
AGENDA_ORDER ASCENDING;\
DESCRIPTION "";\
PRECISION   8;\
NOTES "";\
BEGIN\
\
END\
}
# Section: Subbasin
Section {Subbasins}
# Section: Sim Analysis Info
Section {Sim Analysis Info}
$ws.DispatchInfo displayedObjects 
$ws.DispatchInfo hiddenObjects 
$ws.DispatchInfo axisOption {1}
$ws.DispatchInfo updateOption {1}
$ws.DispatchInfo showObjIcons {1}
$ws.DispatchInfo priorityColors 
# Section: Optimization Analysis Info
Section {Optimization Analysis Info}
$ws.OptAnalysisInfo optDisplayedObjects 
$ws.OptAnalysisInfo optHiddenObjects 
$ws.OptAnalysisInfo optAxisOption {1}
$ws.OptAnalysisInfo optUpdateOption {1}
$ws.OptAnalysisInfo showObjIcons {1}
$ws.OptAnalysisInfo optPriorityColors 
# Section: Object-Type Slot Order
Section {Object-Type Slot Order}
$ws.ObjectTypeSlotOrder  {AggReach} {Inflow} 0 {Outflow} 1 {Total Diversion} 2 {Total Local Inflow} 4 {Total Return Flow} 3 
$ws.ObjectTypeSlotOrder  {AggReach::Reach} {Custom Slot One} 3 {Custom Slot Three} 5 {Custom Slot Two} 4 {Inflow} 0 {Outflow} 1 {Return Flow} 2 
# Section: Scenario Manager
Section {Scenario Manager}
$ws.ScenarioBaseline baselineComments {} 
# Section: RPL Expression Slot Manager
Section {RPL Expression Slot Manager}
set resm "$ws.RplExprSlotMgr"
$resm collectNotes 0
$resm resmRplSet {RULESET\
NAME "Expression Slot Functions Set";\
AGENDA_ORDER ASCENDING;\
DESCRIPTION "";\
PRECISION   8;\
NOTES "";\
BEGIN\
\
END\
}
# Section: SnapShot Manager
Section {SnapShot Manager}
# Section: Output Device Manager
Section {Output Device Manager}
$ws collectRBSRunAnalysisInfo 1
$ws collectRPLPerformanceInfo 1
$ws RPLNumericComparisonTolerance 0
$ws RPLWhileExprMaxIterations 10000
# Section: Name Maps
set mgr "$ws.nameMapMgr"
"$mgr" format 2
"$mgr" end
# Section: Datasets
set mgr "$ws.datasetMgr"
"$mgr" format 1
"$mgr" end
# Section: DMI (part two)
set mgr "$ws.dmiMgr"
"$mgr" format 3
"$mgr" locked 0
"$mgr" showProgDlg 0
"$mgr" showStatDlg 0
"$mgr" end
# Section: Diagnostic Object
Section {Diagnostic Settings}
cwDiag diagEnabled 1
cwDiag diagFile 0 {}
cwDiag toWindow 0
cwDiag filterByLevel 1 2
cwDiag filterByRegex 0 {}
Diag optInfo 0
Diag Advanced 0
# Section: Global Functions Set Manager
Section {Gobal Functions Set Manager}
# Section: RuleSet Manager
Section {RuleSet Manager}
set rsm "$ws.RulesetMgr"
# Section: Optimization Set Manager
Section {Optimization Set Manager}
set mgr "$ws.optSetMgr"
# Section: Optimization
Section {Optimization}
$ws.RplBasedOptController setParameter {ADVANCE 2}
$ws.RplBasedOptController setParameter {SIMPLEX PGRADIENT 4}
$ws.RplBasedOptController setParameter {SIMPLEX TOLERANCE FEASIBILITY 1.000000e-009}
$ws.RplBasedOptController setParameter {SIMPLEX TOLERANCE MARKOWITZ 5.000000e-001}
$ws.RplBasedOptController setParameter {PREPROCESSING AGGREGATOR 10}
$ws.RplBasedOptController setParameter {PREPROCESSING DUAL -1}
$ws.RplBasedOptController setParameter {PREPROCESSING REDUCE 1}
$ws.RplBasedOptController setParameter {TIMELIMIT 3.000000e+003}
$ws.RplBasedOptController setParameter {SIMPLEX DISPLAY 0}
# Section: Simulation Controller
Section {Simulation Controller}
$ws.SimControl ShouldExecInitRules 1
# Section: Rule Controller
Section {Rule Controller}
$ws.RuleControl ShouldExecInitRules 1
# Section: Initialization Rules
Section {Initialization Rules}
$ws initRules {RULESET\
NAME "Initialization Rules Set";\
AGENDA_ORDER ASCENDING;\
DESCRIPTION "";\
PRECISION   8;\
NOTES "";\
BEGIN\
\
END\
}
# Section: RPL Display Settings
Section {RPL Display Settings}
"$ws.RplDisplaySettings" {<RplDisplaySettings>\
  <UserFont>MS Shell Dlg 2,8.25,-1,5,50,0,0,0,0,0</UserFont>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_STATEMENT" priority="0" before="0" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_EXPRESSION" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_STRING" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ASSIGNMENT" priority="2" before="1" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_FUNCTION_NAME" symb="VisTokSym_STRING" priority="7" before="0" after="1" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_SEPARATOR" priority="1" before="0" after="1" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_IF" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_THEN" priority="0" before="0" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ELSE" priority="0" before="1" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ELSEIF" priority="0" before="1" after="0" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ENDIF" priority="0" before="1" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_PLUS" priority="3" before="1" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_MINUS" priority="3" before="1" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_TIMES" priority="3" before="1" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_MODULO" priority="5" before="1" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_INT_DIVISION" priority="5" before="1" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_POWER" priority="40" before="0" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_LOGICAL_OR" priority="4" before="1" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_LOGICAL_AND" priority="4" before="1" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_LOGICAL_IN" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_LESS_THAN" priority="6" before="1" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_GREATER_THAN" priority="6" before="1" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_LESS_THAN_OR_EQUAL" priority="6" before="1" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_GREATER_THAN_OR_EQUAL" priority="6" before="1" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_CONCAT" priority="8" before="1" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_TO" priority="8" before="1" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_LOGICAL_NOT" priority="40" before="0" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_LENGTH" priority="40" before="0" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_STRINGIFY" priority="40" before="0" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_IS_NAN" priority="40" before="0" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_NAN_TO_ZERO" priority="40" before="0" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_JOIN_OBJ_SLOT" priority="40" before="0" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_JOIN_OBJ_ACCT_SLOT" priority="40" before="0" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_OPERATOR" op="RplExprOpId_OBJ_SLOT_LOOKUP" priority="40" before="0" after="0" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_FOR" priority="0" before="0" after="1" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_IN" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_WITH" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_EQUAL" priority="0" before="1" after="1" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_WHILE" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_MAPLIST" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_DO" priority="0" before="0" after="1" indentBef="2" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ENDFOR" priority="0" before="1" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ENDWHILE" priority="0" before="1" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ENDWITH" priority="0" before="1" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ENDMAPLIST" priority="0" before="1" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ENDFOREACH" priority="0" before="1" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_INSERT" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_INTO" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_APPEND" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ONTO" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_FIND" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_WITHIN" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_REMOVE" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ITEM" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_SUBSTITUTE" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_FORITEM" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_OF" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_INDEX" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_FROM" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_PRINT" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_EXEC_SCRIPT" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ADD_SCONSTRAINT" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ADD_HCONSTRAINT" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_MINIMIZE" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_MAXIMIZE" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_FREEZE" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_SUMMATION" priority="0" before="0" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_RMAXIMIN" priority="0" before="0" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_SMAXIMIN" priority="0" before="0" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_REWARD_TABLE" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ENDSUMMATION" priority="0" before="1" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_ENDMAXIMIN" priority="0" before="1" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_REWARD_TABLE_END" priority="0" before="1" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_COMMENT" priority="0" before="0" after="1" indentBef="0" indentAft="0"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_STAT_SUM" priority="0" before="0" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_STAT_AVE" priority="0" before="0" after="1" indentBef="0" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_STOP_RUN" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <LineBreak type="BreakType_TOKEN" symb="VisTokSym_WARNING" priority="40" before="0" after="0" indentBef="5" indentAft="5"/>\
  <TextColor type="RplColor_DEFAULT_FG" colorARGB="#ff000000"/>\
  <TextColor type="RplColor_SEL_DEFAULT_FG" colorARGB="#ff000000"/>\
  <TextColor type="RplColor_TYPES_NAMES_VALS" colorARGB="#ff2600ff"/>\
  <TextColor type="RplColor_SEL_TYPES_NAMES_VALS" colorARGB="#ff000000"/>\
  <TextColor type="RplColor_PREDEF_FUNCTIONS" colorARGB="#ffb4b437"/>\
  <TextColor type="RplColor_COMMENTS" colorARGB="#ffd12e31"/>\
  <TextColor type="RplColor_DIS_FUNCTIONS" colorARGB="#ff9f1535"/>\
  <TextColor type="RplColor_THE_BG" colorARGB="#ffffffff"/>\
  <TextColor type="RplColor_SELECTION_BG" colorARGB="#ffffffb4"/>\
  <TextColor type="RplColor_DIS_OBJS_XHATCH" colorARGB="#ffc0c0c0"/>\
  <TextColor type="RplColor_FUNCTIONS" colorARGB="#ff844800"/>\
  <TextColor type="RplColor_EXPRESSIONS" colorARGB="#ff430067"/>\
  <TextColor type="RplColor_EXPRESSIONS_BG" colorARGB="#fff5f5f5"/>\
  <ShowElemNumbers value="false" />\
</RplDisplaySettings>}
# Section: Script Manager
Section {Script Manager}
# Show Script Manager On Model Load
$ws.rwScriptMgr rwShowScriptMgrOnModelLoad {\
<ShowScriptMgrOnModelLoad>\
   <YesOrNo>false</YesOrNo>\
   <DefaultScriptGroup>All Scripts</DefaultScriptGroup>\
</ShowScriptMgrOnModelLoad>\
}
# Section: Object Attribute Manager
Section {Object Attribute Manager}
# Section: Object Attribute Set
"$ws.objectAttribMgr" objectAttribSet {<ObjAttributeSet/> \
}
# Section: END (successful completion)
Section {Done}