This table enumerates the 222 RiverWare bugs closed in FY 2014 (Oct 2013 through Sep 2014):
Phil, CADSWES, 10-21-2014
| Bug | Description |
| 1704 | Add a mode to the dispatch dialog: omit fully dispatched objects. |
| 1762 | Model Run Diagnostics Do Not Indicate Which Controller! |
| 1834 | Rio Grande Ratio could have an iteration problem with Heron Inflow |
| 1841 | Depth to Flow Manning Trapezoid uses poor iteration setup |
| 2011 | Add thermal object information to the dispatch dialog. |
| 2248 | We should allow standard scale prefixes for units (Mega, etc) |
| 2322 | Units of TIME will not be correct on Series Slots when the units are months |
| 2548 | Sim Controller redispatching incorrectly with water quality on |
| 2574 | Predefined getSlotVals() doesn't deal well monthly units |
| 2592 | conflict lists could be unnecessary |
| 2653 | Post-Simulation Accounting Controller |
| 2699 | impulse response routing method does not balance mass if an Inflow value changes |
| 2820 | Models with cyclic flows cause core dump |
| 2822 | mis-handling of signals, out-of-memory |
| 2826 | Dispatch solved diagnostics should be aviable when selecting Dispatch Management->Controller |
| 2898 | memory leak (MLK) |
| 2903 | Input Outflow Adjustment methods are no longer needed now that we have physical constraint flags |
| 2945 | Pass through account solve unnecessarily and far too often. |
| 2991 | All information not purged to reduce model file size before saving |
| 3015 | Can get AggDiversionSites into inconsistent state wrt accounts |
| 3062 | Table Series Slots are being used for input values, this is not good. |
| 3106 | The SCT does not expand the time series range of a slot when the user sets a flag on an unavailable date |
| 3133 | problem with pausing and stopping model runs (PC version) |
| 3204 | URGWOM model gives out of memory error and then core dumps when changing the start date |
| 3274 | Resume Run still not working with Rio Grande Model |
| 3300 | Simulation problems when the Diversion slot on a Water User is set with a rule |
| 3316 | The Resume Run feature does not work for the URGWOM model. |
| 3511 | SCT issues and new GUI development plea |
| 3542 | GUI, plotting wish list item |
| 3612 | RPL Analysis Dialog does not update properly when a new rule assignment is added |
| 3693 | SeriesSlot::setValue(double, Date_Time *=NULL,) should not have null default argument |
| 3718 | Crash changing the timestep in the Run Control |
| 3734 | Run Control Irregularities |
| 3771 | Copy/Paste Object and Account Information (not data) |
| 3864 | RiverWare workspace environment not constant |
| 3960 | GUI Dialogs have user input issues |
| 3975 | [Enh] Open Object dialog should allow exporting of this object |
| 3977 | Output Manager slot lists need to be export/importable |
| 4178 | Model corruption issues realted to SubBasins |
| 4184 | Open Acct Dlg, Methods Tab: order of method categories is confusing |
| 4247 | Closing the console window on Windows OS crashes RiverWare |
| 4252 | purify errors, lotsa mem lks |
| 4413 | account system configuration cannot configure dependent slots |
| 4425 | Exporting an account sometimes loses input values |
| 4433 | Series resizing with copy operator as an option |
| 4462 | Database DMI: slot selections sort by slot name, not selection name or anything else |
| 4513 | Physical constraint flag persist when it should not |
| 4599 | DB DMI editor won't recognize or incorrectly displays mapped DSS b-parts for object names with certain slot combinations |
| 4607 | Certain Name Maps still not resolving correctly in DB DMI editor |
| 4694 | excelwriter return unhelpful error |
| 4719 | In the middle of running a MRM, a window error message stating "riverware.exe has encountered a problem and needs to be closed." And RiverWare closes. |
| 4792 | HDB/DMI Entries Change Upon Import of Revised Data Object |
| 4856 | RPL set analysis tool "Evaluations" is misleading |
| 4875 | Weird message when trying to close model |
| 4915 | Error solving back in time before model start date |
| 4976 | DSS DMI error on output DMI - goes away when DMI diagnostics are enabled |
| 4977 | Initialization rules and expr slots don't deal well with HasRuleFiredSuccessfully |
| 4992 | DMI Confirm hangs from batch run |
| 5005 | issue with excel DMI |
| 5014 | Assertion Failure in MRM Run when required data is missing |
| 5033 | Intial value of zero breaks kinematic routing method |
| 5067 | Mass Balance bust in storage routing method |
| 5071 | Mass Balance Bust in Kinematic Routing Method |
| 5106 | User Defined Accounting Methods not solving for future timesteps. |
| 5119 | Invoking a DMI results in a message that control file isn't a text file and stops execution |
| 5122 | Newly created rules show up as ASSIGN TO ? [] in RPL Anlaysis Dialog |
| 5142 | Multiple run progress bar isn't shown if concurrent MRM follows iterative MRM |
| 5154 | Distributed MRM is creating temporary folders at C:\ |
| 5163 | Extra "Freeze" statement causes CPLEX exception |
| 5179 | RPL predefined OptValue() returns values for some approximated slots |
| 5187 | Lots of crashes when deleting suppies |
| 5207 | Support for Weekly Timesteps needs to be Hidden or Fixed |
| 5212 | Batch mode ConfigureMRM cmd sets number of traces incorrectly |
| 5213 | RPL debugger breakpoints in expression slots don't work |
| 5216 | SeriesSlot Import RESIZE does grow the series, but doesn't shrink the series |
| 5220 | Slot plot legend font reverts to standard font when slot value changes. |
| 5267 | Print Statements for Initialization Rules do not work when using Rulebased Simulation Controller |
| 5284 | Workspace File->Reopen Model menu selection ignored |
| 5295 | With single trace distributed MRM controller crashes |
| 5302 | Diagnostics in opt are not displaying the name of the object that is causing a run abort |
| 5311 | Aggregate Diversion Slot solving every other day |
| 5321 | Stopping an accounting run leads to an unexpected red abort error |
| 5332 | Crashes on exit |
| 5338 | Control file DMI with wildcard exports non-visible slots |
| 5346 | Several warning messages in TVA Hourly model |
| 5353 | DMI performance problem |
| 5367 | Missing context for invalid slot value message |
| 5376 | Diagnostic that is sometimes misleading about missing minimum values |
| 5377 | Opt diagnostic about hydro blocks is unclear |
| 5381 | Need improved warning msg for particular infeasible case |
| 5383 | Error importing an exported MRM Slot List |
| 5386 | Wide slots are not placed in a fully visible location and resizing width is forgotten. |
| 5387 | SCT - Allow multiple tabs for series slots |
| 5388 | SCT - Allow statistics columns/rows in series slot tab of SCT |
| 5389 | no documentation for Ramping Modeling and Regulation Category |
| 5390 | Crash during MRM |
| 5391 | Bad advice: Save with Extended Precision (not generally necessary) |
| 5392 | Slot Visibility: Slots not in use are showing up in the slot selector and other slot lists. |
| 5393 | Setting Initial Timestep Values with Batch script |
| 5394 | Accounting slots and slots on data objects do not save and reload rule priorities |
| 5395 | Printing line width factor is incorrectly applied for Model Reports |
| 5397 | Multiple Object Method Selector shows methods from two categories. |
| 5398 | Find Input Slots is finding too many accounting slots |
| 5399 | Cannot move rule to first position in policy group |
| 5400 | The new trace-based DMI doesn't work in a multiple run |
| 5401 | Slot order in Open Object dialogs is inconsistent |
| 5402 | Expression Slot Function Set import and overwrite fails |
| 5403 | Initialization rules do not allow @"t" or @"t-1" references |
| 5405 | Diagnostics sometimes cause the RiverWare interface to freeze |
| 5406 | GetDayOfMonth Predefined Function not evaluating to correct day of month |
| 5407 | Exiting RiverWare aborts a distributed multiple run |
| 5408 | Index Sequential "Intervals" do not work with distributed MRM |
| 5409 | Visual Studio/Debug-only CRASH: QGraphicsScene/Item paint event, operating horizontal scrollbar. |
| 5410 | SCT Export Copy is not exporting row headers |
| 5411 | Inserting slot in SCT hides existing slots |
| 5412 | DMI file chooser does not let you select a control file or executable if the directory is write protected |
| 5414 | Tabular Series Slot Report: Time Range and Description are not retained. |
| 5415 | Study Manager: error if no executable is specified in control file/executable style DMI event |
| 5417 | Diagnostic about hydro blocks does not clearly explain the problem |
| 5418 | Objects jump off workspace if moved slightly when opening |
| 5419 | Model Reports: Potential Crash with Slot Table: Uninitialized account pointer |
| 5420 | Tabular Series Slot Report: 'Show 0.0 as blank' option is causing values with commas to be blank. |
| 5421 | Can edit only one curve in the Curve Configuration editor for Plot Pages |
| 5422 | SCT behavior change in version 6.4 |
| 5423 | Can't close optimization goals (and perhaps other dialogs) |
| 5424 | 'File >> Save Model' problem in new RiverWare session when no model file path is defined. |
| 5425 | Assertion error plotting Integer Indexed SeriesSlots |
| 5426 | Slot Column Label filter does not work when selecting slots |
| 5428 | No Diagnostics Context for constraint error message |
| 5429 | CMD screen error message when running model |
| 5430 | Periodic slot lookup is inconsistent based on order of configuration |
| 5431 | MRM configuration is not showing excel options |
| 5432 | A reach with near zero flow can calculate a non-zero Salt Availabe for Removal |
| 5433 | Arkansas model has differences in power method in 6.4 |
| 5435 | Storage account is not solving for timesteps in future when there are lags |
| 5436 | In Sim, expression slots now say End of Block, not End of Timestep for eval time |
| 5437 | Crash operating the Plot Dialog's 'Scale to Specified Time Range' |
| 5438 | Adding a RPL breakpoint to an OLAM causes crash on next model load |
| 5439 | Workspace: Right clicking on object (to show context menu) no longer selects the object |
| 5440 | Plot page generation does not re-use existing dialog |
| 5441 | Crash on reload with plot open |
| 5442 | SCT crash: right-clicking in empty area of series table with no cell selection. |
| 5443 | Renaming a copied slot with name ending in a number causes a crash |
| 5444 | SCT: unintentional data changes due to numeric entry edit field 'focus' behavior |
| 5445 | A crash can occur if errors are reported in a popup window while loading an SCT file. |
| 5446 | Error message should say "Release" instead of "Turbine Release" |
| 5448 | Phantom commands to HDB Server |
| 5449 | Geospatial view background image refresh problem with MrSID format |
| 5450 | Slot order is not maintained on open object dialog |
| 5451 | DMI input of AggSeries requires NONE type for all columns after first column |
| 5452 | Series Slot with Periodic Input having NONE unit type: Auto-width of series column not always sufficient. |
| 5453 | Slot Type Filter in Slot Selector: TableSeries filter value is including 1x1 Table Slots |
| 5454 | Missing Diversion Shortage Calculation |
| 5455 | Tolerance check between Diversion Requested and Diversion is needed when solving water user given diversion |
| 5456 | Plot Page Output Device Config Dlg: Cannot paste Periodic Slots into Slot List |
| 5458 | Thermal economic values are incorrect for large hydro generation values |
| 5459 | Series Slot with Periodic Input does not copy and paste |
| 5460 | Unable to Insert a Column in an AggSeries Slot |
| 5461 | Pause Before Timestep Range doesn't update after a Script a "Set Run Range" is used |
| 5462 | All Columns of an AggSeries Slot do not DMI In from excel with the same units |
| 5463 | Importing a table column doesn't allow NaN |
| 5464 | Initial zero step response coefficients results in warning for backcasting or setting pre-run values |
| 5465 | RiverWare crashes when changing series slot timestep in large model |
| 5466 | RPL set analysis tool doesn't remember column order |
| 5468 | If RIVERWARE_HOME isn't set distrib MRM generates bad XML |
| 5469 | Distrib MRM generates bad XML if gfs is saved in model file |
| 5470 | DMI "start timestep" for annual slot is a monthly date |
| 5471 | Diagnostic settings for predefined functions is not working |
| 5472 | MRM distributed run working directory specification cannot use env var |
| 5473 | parser stack error loading a ruleset |
| 5474 | Model report for three column table slot gives incorrect labels |
| 5475 | Run Analysis - Window maximize issues |
| 5477 | Assertion failure, Edit Account Dlg when run range is changed |
| 5479 | Coping logic into rule causes if/with/for statements to show up in expansion tree of ruleset |
| 5480 | Crash when closing a Name Map if Name Map Manager is not open |
| 5482 | Top of Cons Pool is no longer required to be the same across a flood control subbsin |
| 5483 | Crash deleting (Pie-) Chart Device when its Configuration Dialog is open. |
| 5484 | Model run aborts the first time model is run after setting up an account application ( Inline Simulation and Accounting) to run as a Water Operations appication (Inline Rulebased Simulation and Accounting) run |
| 5485 | Incorrect error that turbine release is greater than capacity |
| 5486 | assertion error after changing dates and running the model |
| 5487 | Plot Dialog: Assertion failure adding slot after having tried plotting a single-column table slot |
| 5489 | Crash loading model when using an SCT with Object Grid |
| 5490 | Canceling a move (drag) of the first Rule of a Policy Group puts it at the end of its original group |
| 5492 | Results not displaying in Agg series slot columns (newly appended columns) |
| 5493 | Accounting not clearing values between runs |
| 5494 | Rows in SCT are out of synch when SCT loads |
| 5495 | Periodic slots are not repeated in graphs. |
| 5496 | GetSeriesSlots returns slots from object for methods that aren't on |
| 5497 | When moving the first rule in a group, if the move is cancelled, the rule goes to the bottom. |
| 5498 | DMI input for Aggregate Series slots only imports on column when initiated through a script |
| 5499 | DMI input for Aggregate Series slots only imports on column when initiated through a script |
| 5500 | Switching to a parametric plot in Plot Dialog ignores bottom axis' configured precision. |
| 5501 | issue with inline power plant |
| 5502 | FilterByObjType: (1) only first type used (2) 'DataObj' problem |
| 5503 | RPL: core dump when writing to agg series slot |
| 5504 | RPL IF statement copy/paste can lead to a crash |
| 5505 | Diag window closes when invalid RPL set is loaded (sometimes) |
| 5506 | Redundant DMI execution (GUI only) |
| 5507 | Creating a Subbasin from AggObjs selected on the workspace no longer includes Element Objects. |
| 5508 | problem with having multiple flood control basins in one model |
| 5509 | issue with new Inline Power Plant method |
| 5510 | Crash modifying a plot page configuration via the output manager |
| 5512 | Cannot synch slots different than run timestep |
| 5513 | Interpolate Between Inputs feature in SCT does not work for slots/SCTs that are different timestep than the model |
| 5517 | Exporting then importing a table slot doesn't work |
| 5518 | Importing evaporation coefficients through DMI does not re-size units |
| 5519 | Open TableSeries Slot Dialog: Selection Statistics panel doesn't work |
| 5521 | SCT: Entered timestep cell value doesn't get Input flag if new value matches old value |
| 5522 | An empty subbasin does not save with the model |
| 5524 | core dump when trying to run model with phase flood control |
| 5526 | core dump with phase balancing flood control |
| 5527 | Periodic slot not properly saved into model file |
| 5528 | RPL displays incorrectly under Windows 8.1 |
| 5530 | Scripts Open Global Functions Set action does not work |
| 5531 | Distributed MRM looks for first trace of data, even when initial offset is non-zero. |
| 5536 | RW crashes when change Flow type to af/mo in Unit Scheme Manager |
| 5538 | Script not accepting changing of day and month in table slot |
| 5539 | Seepage values not showing when switching from Single Seepage Value to Linear Seepage |
| 5540 | Object Acct Sum Dlg: wrong number of time columns when switching column mode |
| 5542 | R flag is not showing up on Model Run Analysis cells |
| 5543 | Name Changes on Reach Objects not working as advertised |
| 5544 | In Script Manager, setting the Initialization Rules execution flag to Yes only works for the Simulation and Rulebased Simulation controllers |
--- (end) ---