RiverWare Model Summary Report Generation Design
Reservoir Table Slot Augmentation
Phil Weinstein, CADSWES -- 2-20-2009 -- hit refresh.

In general, for each Slot included in the report, output for only the Slot's attributes and contained data is included.

         Insert ...
An exception to this is the addition of computed rows or columns within Reservoir Table Slots related to (1) elevation, (2) storage volume or (3) surface area. Special computed rows or columns can be inserted after Table Slot rows or columns containing any of those three entities. These will contain data computed from the Table Slot rows or columns and data in -- or interpolated from -- the Reservoir's Elevation Volume Table Slot and Elevation Area Table Slot.

There are two types of support:

(1) Single Row or Column Insertion

For Reservoir Table Slots with a single row or column having the relevant data (elevation, storage, or surface area), a single computed row or column can be inserted after that Table Slot row or column.

Example: Rating Curves -- Insertion of an Elevation Column.

This configuration would result in the insertion of a "Elevation" column after the first ("Storage") column. The Elevation values will be taken from -- or interpolated from -- values in the Reservoir's Elevation Volume Table Slot.

The referenced Table Slot Column (in this example, Column 1), only has to have Volume units. It does not have to be a slot column actually labeled "Storage". An error is reported if the referenced Table Slot Column does not have Volume units.

 

 
(2) All -Row or Column Insertion

For Reservoir Table Slots having homogenous data of one of the three supported entities, a computed row or column can be inserted after every Table Slot row or column.

Example: Operating Level Table -- Insertion of an Storage Rows.

This configuration would result in extra rows being inserted after every Table Slot row. The values within the table represent elevations [ft]. The added rows would be Storage (volume) rows.

The [X] Also Insert Pool Percentage Rows checkbox generates one or two (probably two) super-extra rows for each Table Slot row to indicated the percentage of the represented Storage quantity with respect to the Conservation Pool and the Flood Pool. See the specification for this in the USACE Text Output requirements document (PDF). The resulting output is illustrated in that document with this mock-up (which shows only one row for both Conservation Pool and Flood Pool data -- but this will likely be split into two distinct rows):

The "[X] Also Insert Pool Percentage Rows" operation depends on the Reservoir existing within a Computational Subbasin with these scalar slots having defined values. They represent Operating Levels (the columns of the table shown above).       
Bottom of Conservation Pool    eg. 2
Top of Conservation Pool   eg. 5
Top of Flood Pool   eg. 14

---